|
H/PC Elite Posts: | 702 |
Location: | Europe | Status: | |
| Hey all,
Has anyone gotten to run eVB software on the Intermec under CE 2.11? Whenever I try to install the runtime, it seems to work fine until the final stage, which is when the installer hangs and freezes. When I then warm reboot and try to run any eVB applications, the current explorer window simply hangs and freezes. What could be causing this? |
|
| |
|
Subscribers H/PC Guru Posts: | 5,736 |
Location: | United States | Status: | |
| Not that helpful but here’s a thread where the 6651 was briefly mentioned
https://www.hpcfactor.com/forums/forums/thread-view.asp?tid=6745&start=1
I think the 6651 in question was running HPC2000 though |
|
| |
|
Global Moderator H/PC Oracle Posts: | 12,669 |
Location: | Southern California | Status: | |
| I always install the runtime files manually after extracting them from the CAB. I put the following files in \Windows:
pvbctrl.exe
pvbdecl.dll
pvbform2.dll
pvbhost2.dll
pvbkill.exe
pvbload.exe
vbscript.dll
Then I put the object controls (MSCE*.dll ) on the Storage Card. Then I register all the DLLs manually to their locations using RegSvr2.exe. Works every time, on every CE 2.11-3.0 device.  |
|
| |
|
Administrator H/PC Oracle Posts: | 17,988 |
Location: | United Kingdom | Status: | |
| If there is an issue in the installer, then best we try and weed it out. |
|
| |
|
H/PC Elite Posts: | 702 |
Location: | Europe | Status: | |
| CE Geek - 2023-10-07 8:36 AM
I always install the runtime files manually after extracting them from the CAB. I put the following files in \Windows:
pvbctrl.exe
pvbdecl.dll
pvbform2.dll
pvbhost2.dll
pvbkill.exe
pvbload.exe
vbscript.dll
Then I put the object controls (MSCE*.dll ) on the Storage Card. Then I register all the DLLs manually to their locations using RegSvr2.exe. Works every time, on every CE 2.11-3.0 device.
I tried registering the DLLs, but upon trying to register mscefile.dll nothing really happened, the command prompt just sort of froze |
|
| |
|
Global Moderator H/PC Oracle Posts: | 12,669 |
Location: | Southern California | Status: | |
| Sounds like you're using RegSvrCE, which is command line-based. RegSvr2 has its own GUI, so it doesn't require using the command line.  |
|
| |
|
Administrator H/PC Oracle Posts: | 17,988 |
Location: | United Kingdom | Status: | |
| Does the device already have any of the DLL's in ROM? |
|
| |
|
H/PC Elite Posts: | 702 |
Location: | Europe | Status: | |
| CE Geek - 2023-10-07 8:36 AM
I always install the runtime files manually after extracting them from the CAB. I put the following files in \Windows:
pvbctrl.exe
pvbdecl.dll
pvbform2.dll
pvbhost2.dll
pvbkill.exe
pvbload.exe
vbscript.dll
Then I put the object controls (MSCE*.dll ) on the Storage Card. Then I register all the DLLs manually to their locations using RegSvr2.exe. Works every time, on every CE 2.11-3.0 device.
Whenever I insert my CF card I get a warning about increasing power usage, is that a thing? Does having a CF card inserted draw more power? |
|
| |
|
H/PC Elite Posts: | 702 |
Location: | Europe | Status: | |
| C:Amie - 2023-10-11 8:51 AM
Does the device already have any of the DLL's in ROM?
Yes there were, but they didn't seem to be functional, nothing ran. It looked like it was just the "core" framework, but nothing worked |
|
| |
|
Administrator H/PC Oracle Posts: | 17,988 |
Location: | United Kingdom | Status: | |
| Did my installer overwrite the existing DLL's successfully or are they still the XIP versions? |
|
| |
|
H/PC Elite Posts: | 702 |
Location: | Europe | Status: | |
| C:Amie - 2023-10-11 12:02 PM
Did my installer overwrite the existing DLL's successfully or are they still the XIP versions?
They were overwritten, they seem to have just existed in RAM like regular files |
|
| |
|
Administrator H/PC Oracle Posts: | 17,988 |
Location: | United Kingdom | Status: | |
| And there is definitely no contamination from VBCE 1.0 on the device? |
|
| |
|
H/PC Elite Posts: | 702 |
Location: | Europe | Status: | |
| C:Amie - 2023-10-11 12:55 PM
And there is definitely no contamination from VBCE 1.0 on the device?
I don't believe so, no. That used .pvb, right? How would I check for traces? |
|
| |
|
Administrator H/PC Oracle Posts: | 17,988 |
Location: | United Kingdom | Status: | |
| Only if you had tried to install the runtime somewhere along the way.
Have you tried a hard reset? |
|
| |
|
H/PC Elite Posts: | 702 |
Location: | Europe | Status: | |
| C:Amie - 2023-10-11 4:11 PM
Only if you had tried to install the runtime somewhere along the way.
Have you tried a hard reset?
I just did that, trying to run a .VB file after a hard reset results in "The control File ({...} ) could not be created." |
|
| |
