This is a great forum. I wanted a tablet pc of some kind and after doing a bit of research decided to gamble and bought a new Neta 980 from the manufacturer on eBay. I chose the Neta because the dock was included. Having never used any kind of handheld I relied heavily on this forum in my planning.
I really like this Neta 980. It feels solid in my hands. Doesn't feel like cheap plastic. The 10.4" screen is pretty good. Futurecomglobal sells 5 every week on eBay for $250 new. I was anticipating some real hardware issues but so far it has been encouraging. There are plenty of ports on the dock. USB keyboard was plug n play into the dock.
As far as software I have installed quite a few apps. Most of the apps with Cabs labeled ARM and\or SA1100 work just fine. Battery life on this thing seems pretty decent. I have pulled it out of the cradle several times and after 1 to 1 1\2 hour use I am still in the 70% range.
Stuff I sorted out... Wireless & RDP
I tried a Sandisk WIFI +128 MB CF card but wasn't able to get the wifi working. It may work but I finally gave up. I may try again later. I really wanted to run the Sandisk so I could put a Toshiba 5GB Datapak in the PCMCIA. When the Sandisk failed I picked up a Macsense WPE-700 for $9.90 at Fry's which uses a Prism 2 chipset
(great reference here
http://www.seattlewireless.net/index.cgi/SenaoCard ). Thanks to the driver cmonex provided on another thread I got it working! Seems like I had 64 bit wep working at one point but no longer.
After a bit of reading I got my settings right and have Remote Desktop Working. I also implemented multilogon RDP. That RDP is cool. With my wireless connection I can browse my desktop from the tablet and it is very fast. In fact the RDP browse is faster than the native IE 5.5 Neta browser. I installed ftxPBrowser, PHM Regedit, Pocket Hosts, ResInfo, TasccalCalc, Textmaker, Total Commander, Simcity 2000, SolitairePack. They all appear to work fine. Many of course have failed.
Stuff I can't figure out... Wireless Sync
I have wifi working
(more on that below
), but I can't seem to figure out how to sync wirelessly. I sync fine via USB, but can't wirelessly. I have Activesync 3.8 0n my desktop. Do I need Activesync or a similar product on my 4.1 Device? I read a couple of the guides here but they were of no use, as my TCP\wireless is set up correctly. Any help would be greatly appreciated.
Does anyone have MS FreeCell & Solitaire working on CE.Net 4.1? They were not on the device and I can't seem to get them to work.
Has anyone had any success getting a PCMCIA 5GB Datapak to work on a CE 4.1 device like this. The CE Storage Manager sees a gig of it but can't seem to do much with it. Won't format it and I can't tell if there is a way to map it. I'll look at that some more later but will take any advice.
Thanks to cmonex, for the link to this CE.Net 4.1 driver -
http://download.eagletec.com/ET-CWB1000/ET-CWB1000PocketCE4.exe
Nice forum. Glad to be here. Thanks banacek