Enabling portrait mode for Vadem Clio C-1050

CESD-H-0033

Applies To:

  • VADEM CLIO C-1050
  • MainStreet Networks CLIO C-1050

Overview:

The Vadem Clio C-1050 supports screen rotation of 0 and 180 deg by default. This article describes the steps for enabling the further selection of 90 and 270 degree rotation in the "Clio Controls" application.


How-to Guide:

  1. Perform a soft reset. This will clear out session data which could potentially interfere with the process
  2. Bring up the Clio Controls through Start > Programs > Vadem > Clio Controls

Hold the Control key down while executing steps 3- 7
(You MUST hold down the Control Key constantly while performing these steps)

  1. Under Contrast, tap the More button twice in a row
  2. Under Contrast, tap the Less button twice in a row
  3. Under Brightness, tap the More button twice in a row
  4. Under Brightness, tap the Less button twice in a row
  5. Tap the OK button at the top right of the window
  6. Bring up the Clio Controls again through Start > Programs > Vadem > Clio Controls

This time, if all went well, under the Video Settings tab you should now have 4 choices (0, 90, 180, 270) for Video Rotation.


Acknowledgements:

Information on this How-to-Guide is based on information from the Pocket PC City community forums