Software for Windows CE/Mobile

MSCETool

mscetool operates with MSCE header file of WinCE CAB files (a file with .000 extension that describes the installation process). The main purpose of this utility is to change architecture and/or WinCE version number fields in the header. There are many programs that can work under particular WinCE versions but are distributed in CAB files with a strong architecture and minimum/maximum version numbers specified.

B000FFTool

B000FFTool operates with MS B000FF (MSBIN) recordized image files containing Windows CE/Mobile ROM images. Can be useful to fix incorrect load address values in CE6 BIN images produced by BOOOFF, XipPort, Remaker and similar tools.

TCCToolCE

tcctoolce performs some operations specific for Telechips ARM CPU based devices under WinCE (only flash image saving is currently implemented).

TaskbarControlCE

TaskbarControlCE is intended to control Explorer taskbar appearance in case of switching between normal and fullscreen windows. Initially developed for Createc/Joyous J-2619 car multimedia station.

SiLabs CP210x VCP driver for WinCE 4.2

A VCP (Virtual Communication Port) driver for CP210x (CP2101, CP2102, CP2103, CP2104) USB to Serial Bridge chips manufactured by Silicon Laboratories (formerly Cygnal). The driver creates COMn: virtual serial port available to any serial communication application (terminal emulators, GPS navigation software etc.).

The driver works only on ARMV4 CPUs under Windows CE 4.2 (for example, Windows Mobile 2003 SE or Pocket PC 2003). CE 5.0 and 6.0 drivers are available on SiLabs site.