|
| Tried to install 3com Ethernet pc card 3C589D-TP on my Jornada. Downloaded the driver from this websit and followed the instruction. After inpute the driver's name, the HPC freezes, not responding to any action and doesn't come back until I pull out the pc card. Any advice will be appreciated.
Is 3c589D-TP workable on Jornada 720? If not, which one among the 3c589x series is (or probably is )? |
|
|
|
H/PC Elite Posts: | 566 |
Location: | Farnham, Surrey, United Kingdom | Status: | |
| There is a known error with those 3com cards, only with the Jornada Series. I've got one too. You could try resetting the EPROM, by doing that you reset all setting to the factory defaults and should get it working.
The EPROM reset utility is here:
http://www.hpcfactor.com/support/cesd/h/0022.asp
Nick
PS: Please search the forums before you post, some of use find it very annoying. *cough* ProgramSynthisiser. |
|
|
|
Administrator H/PC Oracle Posts: | 17,983 |
Location: | United Kingdom | Status: | |
| The 3c589 drivers are beta drivers, so do often prove to be problematic.
Have you tried a soft reset with the card in / out. Are you sure you used the HPC2000 version and not the HPC Pro or 2.00 one? |
|
|
|
H/PC Elite Posts: | 566 |
Location: | Farnham, Surrey, United Kingdom | Status: | |
| C:Aime, why when I try the EPROM reset utility it never works? I never get past the loading utility what is wrong?
Nick |
|
|
|
Administrator H/PC Oracle Posts: | 17,983 |
Location: | United Kingdom | Status: | |
| Are you running it under DOS with card services loaded? |
|
|
|
H/PC Elite Posts: | 566 |
Location: | Farnham, Surrey, United Kingdom | Status: | |
| From a boot floppy, yes dos. Whats Card Services?
Nick |
|
|
|
Administrator H/PC Oracle Posts: | 17,983 |
Location: | United Kingdom | Status: | |
| DOS PCMCIA driver |
|
|
|
| To Nick Charlton:
Thank you for your advice. Have reset its EPROM to the factory defaults. But still not working. Regarding to your problem, maybe my experience can do some help. The configure program did not work well on my laptop. It always told me that no 3com adapters were detected. But it worked fine on my friend's laptop.
To C:Amie:
I tried soft reset with the card in or out many times and I used driver found from that page (http://www.hpcfactor.com/support/cesd/h/0017.asp)? It's still not working.
|
|
|
|
Administrator H/PC Oracle Posts: | 17,983 |
Location: | United Kingdom | Status: | |
| IT is always the D version which causes the most problems, for some it works, others it doesn't.
I haven't encountered a C yet which hasn't worked - aside frm the known suspend bug.
You could look out for a 589C or for a Socket LPE (no known bugs).
Only other thing I can suggest for the D is to hard reset and try it again, but that may be a lost cause.
Can you provide me with all the information on the back plate of the card, I'm trying to find a pattern in the failures.
Thanks. |
|
|
|
| Sure, but I am not sure what infomation you want.
3Com EtherLinkIII 3C589D-TP
EA=006008B31986
SN=6LB1B31986
PN:16-0108-000
REV:B
If you need the configuration shown by the dos utility, just tell me. |
|
|
|
Administrator H/PC Oracle Posts: | 17,983 |
Location: | United Kingdom | Status: | |
| I think thats it, thanks. |
|
|
|
| Hello to all!
Guys, i have one problem. Any know how can i start work my EnterNet 3Com 3CCFE574BT ???
My Jornada 720 are watching it, but i havent.... any suggestion???
Please if you can help me just write me on e-mail, i will be glad...
mrhunt@yandex.ru |
|
|