|
| I have a HP660LX. Is it possible to connect to the internet via wifi. What CF card is compatible? I would appreciate any assistance. |
|
|
|
Global Moderator H/PC Oracle Posts: | 12,662 |
Location: | Southern California | Status: | |
| Check here for compatible WiFi cards
http://www.hpcfactor.com/hcl/ |
|
|
|
| Question: I purchased a DLink DWL-650 G Card. I downloaded the appropriate drivers. I synched with with PC and loaded the drivers. I see PRISMSTA software - when I try it I get "Unable to connect to the Wireless Card please insert it." The card is in, But no response. The lights on the Card are not lighting up.. Pls advise
Thanks Jeff |
|
|
|
Global Moderator H/PC Oracle Posts: | 12,662 |
Location: | Southern California | Status: | |
| Have you installed the CE 2.0 Network Service Pack?
http://www.hpcfactor.com/support/patching/ce20/nsp/ |
|
|
|
| Okay I downloaded it onto my PC and automatically loaded onto my HP660LX - but I could not open it. I see the files. I restarted the handheld like the readme file said. Still action from the PC card. Did I niss something? |
|
|
|
Global Moderator H/PC Oracle Posts: | 12,662 |
Location: | Southern California | Status: | |
| Did you also install CE 2.0 Service Pack 1, as recommended on the page I linked above? |
|
|
|
| Yes I did. How do you get it to load. The Sp1 file is there. But does not open |
|
|
|
Global Moderator H/PC Oracle Posts: | 12,662 |
Location: | Southern California | Status: | |
| You have to run the HP SP1 file on your PC to extract the setup.exe file, which you in turn run on the PC while the 660LX is connected via ActiveSync. This will install the CE 2 Service Pack on the 660LX. |
|
|
|
| I did load it and it is installed onto my hanheld. But when I try to open it - MS Handheld PC 2.0 Sp 1 I get "Run the application first, then open this form within the application" I did reset the handheld first before attenpting to open as stated in the readme file |
|
|
|
Administrator H/PC Oracle Posts: | 17,950 |
Location: | United Kingdom | Status: | |
| SP1 will not actually change issues that you are experiencing with the LAN; so long as the NSP is installed.
You might want to try a different driver. Go to the HCL and search for:
CF100W Compact Flash NIC
Try its 2.0 driver.
By the way, you are using a 2.00 660lx and not a 2.11 660lx, right? Huge difference! |
|
|
|
| Thanks. I will try the HCL download. Do I need to remove PRISMtA? Yes I am using Windows CE 2.0 |
|
|
|
Administrator H/PC Oracle Posts: | 17,950 |
Location: | United Kingdom | Status: | |
| Yes, do remove it. |
|
|
|
| Thanks again I must be getting close. I downloaded the drivers for the CF100W. When I try to open Wireless Config utlity I get "There are no wireless network adapters installed, so the configuration Utility will quit" |
|
|
|
| Can anyone give me some ideas on how to get my DWL-650 Wireless lan card to work with my HP660 lx. I loaded the appropriate drivers but no luck. I continue to get -There are no wireless network adapters installed, so the configuration Utility will quit" |
|
|