Wabook sky 10" windows problem

Hello I have wabook skyepc-1027 10 inch when I try instal system windows ce computer starting boot and open windows in china wersion when system try to auto format nand falsh and instal right system there is comunicate system disk no existed
how I can slove this problem

What flash image are you using? Where did you get it from?

I download this rom from this site
http://www.hpcfactor.com/downloads/details.asp?r=A9F02C7E-DA0C-4F69...

It's look like broken flash memory but my windows work before I try change to other system

Not sure what is going on with your device. I just downloaded the file you listed above to make sure it was a good image. It was. I then flashed my Wabook Sky. It flashed properly. When it was done, it displayed the message shown below. I then rebooted my Wabook Sky...it works fine. You might try again and see what happens, or try another flash from somewhere else. Maybe here: http://devio.us/~nextvolume/via_arm/

BTW, what you describe is a common problem for people who have tried to install Android and Linux on these things...you can read more about it in the link I mentioned above.





Attachments
----------------
complete.jpg (45KB - 9 downloads)

I downloading systems frome this site and result is the same

Email sent

the same result
still viev mesage system disk no exist
maybe flash memory is locked

Yes, sounds like your netbook has failed, or at least the NAND has become corrupted.

Question: Did you try installing Android or Linux on it previously?

no memory can't be broken because system work before I try instal system
have You got android or linux for laptop 10 inch ??

No I never tried Android or Linux because I read that it corrupts the NAND memory on devices making it impossible to reinstall Windows CE.

I am too scared to try...I always seem to destroy my CE devices by trying to do more than I should.

I have this problem too on a wabook sky. It stopped detecting the keyboard so I reinstalled the above image. Keyboard worked but again system disk no existed error appears. Any idea on a fix?