IrDA between NEC Pro 900c and Toshiba e805

Hello!
I am trying to connect the two devices ,so I can send files between them,but there is a problem
I can't connect them Tried switching the speed of bits being transfered - again failure.
I am using the built-in Beam program on the Toshiba if that's a good info ...
So.. any suggestions
Thanks !

You should install software on the Mobilepro 900 that will communicate properly with your pocketpc. Some really good programs are EZwap, ExObex, MBeam, and Peacemaker Pro. Each of them has different devices they support...but I always used Peacemaker with my pocketpcs...

More info here: http://www.hpcfactor.com/support/cesd/c/0017.asp

Will try it after I get a serial cable
The problem was that I couldn't connect the HPC to the PC via the USB,because I run Win 7,which doesn't support the drivers needed for USB Connection
Then tried with the IrDA,again fail
Then with a modem and my phone line - guess what Didn't work again
But will buy a serial cable and I hope I won't have problems
Thank you !

Edited by MednataMiza 2011-03-03 6:30 PM