|
H/PC Newbie Posts: | 16 |
Location: | United Kingdom | Status: | |
| I have a HP340LX and a 360LX, I set up the activesync and it worked perfect for a day, I switched it off and went back the next day and now it will not connect. I have tried a soft reset, checking out what I can but nothing seems to cure it. Help please. |
|
|
|
Administrator H/PC Oracle Posts: | 17,950 |
Location: | United Kingdom | Status: | |
| Have you been playing with the serial port speeds in the PC or H/PC:
http://www.hpcfactor.com/support/cesd/c/0025.asp
If so, reset them. The 300 series doesn't like going over 56K and the PC should be left alone on 19.2. |
|
|
|
H/PC Newbie Posts: | 16 |
Location: | United Kingdom | Status: | |
| Thanks for your help, but the speed is set at serial port 19200, I have not touched the PC settings, not really sure how to either. I just noticed that although the screen taps are set at loud in sounds, there is no sound. Also I tried sending a file by infra to my 340LX a message came up saying that it was unable to establish a connection while H/PC is connected to the desk top.They have both been switched off overnight and the 360LX is not even in the cradle, something simple is going wrong here and I have tried everything that I know. I did get it working by doing a hard reset losing all of my files and then re-installing activesync, but that only woked until I disconnected and then went back to the same problem.
Any help will be greatly appreciated. |
|
|
|
Administrator H/PC Oracle Posts: | 17,950 |
Location: | United Kingdom | Status: | |
| What happens when you soft reset it? Have you installed SP1? |
|
|
|
H/PC Newbie Posts: | 16 |
Location: | United Kingdom | Status: | |
| Nothing happens to sort the problem, just a soft reset and no change. What is SP1? |
|
|
|
Administrator H/PC Oracle Posts: | 17,950 |
Location: | United Kingdom | Status: | |
| Go to support and then H/PC:Update. You can download it from there. |
|
|
|
H/PC Newbie Posts: | 16 |
Location: | United Kingdom | Status: | |
| Again thanks for your help I installed last night, got the 340 and 360 working perfectly, switched on this morning working ok, switched off went away, came back and same problem, they do not recognise each other. I only installed SP1 on the 360lx, tried to re-install this morning on both and nothing. |
|
|
|
H/PC Newbie Posts: | 16 |
Location: | United Kingdom | Status: | |
| Is anybody able to give me some help on what is going wrong with my activesync? I have had it working and then it stopped and will not regognise the desktop pc, any help greatly appreciated. Thanks. |
|
|
|
Global Moderator H/PC Guru Posts: | 7,188 |
Location: | USA | Status: | |
| Disconnect your HPCs, then open Activesync and delete all your partnerships. Then reset your HPC and then plug it in and see if it is recognized... |
|
|
|
H/PC Newbie Posts: | 16 |
Location: | United Kingdom | Status: | |
| Thanks for your help, it worked and I am back on, only problem is that every time that I shut down my desktop PC, I have to do it again. But I can certainly live with that. Thanks for your help again. |
|
|
|
Global Moderator H/PC Guru Posts: | 7,188 |
Location: | USA | Status: | |
| Now it is time for experts to troubleshoot...I can only provide amateur "this is what I did" assistance... |
|
|