NEC 900C and orinoco gold card

Hi there,
Today i got my nec900c . I got a wireless card orinoco gold for it. Can somebody tell me a step by step to connect with the internet? Thanks for help a newbie....

Hi.... hope you enjoy the device.

Start here for wifi help: The Official Definitive "I have a Wifi problem" Guide

Let us know if you have problems along the way. The card definitely will work with that machine.

ok. thank you a lot. I had download this file for ce4.20 :CE4_v7.82.881.zip I had unpacked, is it right to copy the cab files on the cf storage card and then install? I can#t use active sync,because I have only macs....Next i had tried copy the cab files and install..windows means it is not a cabfile...

Edited by mindhunter63 2011-09-05 5:19 PM

See these three guides in Support on the different ways that you can install onto CE:
Installing Programs from the Host
Installing Programs using .cab files
Installing Programs manually

Correct, mindhunter63, but copy the ARM CAB from inside Inflated.zip.

Did I Need maybe some other Drives also? I had Read ,maybe I Need Agere wireless Driver too.. Right?

Hi, I am back.Today I had download the agere driver and install on the nec. I see it in the contr. panel in software programs. Which is the correct driver name when i am insert the card? Thanks!

It normally loads the driver automatically, but if it asks for a driver, type in wlags46.

Thank you, I had try it. In control panel, I see there are the networkdrivers installed. I had installed in path windows.If i insert the card and type"wlags46",i had try to type in small fonts and big fonts,it not works. open windows start agere client, comes "driver could not load". OK what next? Thanks!

Maybe it will helps if i make some screen shots and send it to you...

As far as I can see from the driver cab the driver name is WLAGS46.DLL

I've added an inflated.zip and driver name to the roamabout download

The driver name i see is installed. I type it, when the card is insert,start the wireless client,but always he tells me the driver not loaded.....
I had download this file for ce4.20 :CE4_v7.82.881.zip I had unpacked, is it right to copy the cab files on the cf storage card and then install? I can#t use active sync,because I have only macs....Next i had tried copy the cab files on the cf card and install..windows means it is not a cabfile...maybe i need a win pc for the setup.exe for this files...???

Ah, if you've typed the driver name and it is the utility giving the error it means the card isn't compatible with the chipset/firmware (usually).

Try the Agere reference driver CESD in support, or perhaps someone can advise more specifically.

Thank you for help! I had load the Agere Reference Driver from here. I will try it anpries Time again, and i will tellyou when it Works....

I've had the best luck with the inflated cab files from the "Agere Reference Driver" set. Maybe if you specify precisely which Orinoco card you have by brand name (lucent, agere, etc) someone here will be able to provide more detailed information.

If nothing works, I think cmonex has some drivers on her site as well (www.hpcmonex.net) if you search through the files from the old "izemize" (sp?) site.