|
Subscribers H/PC Guru Posts: | 5,713 |
Location: | United States | Status: | |
| Hi,
I have a Compaq 2010c with CE 2.0, I know i cannot install linux with CE 2 :, but if i get the ce pro rom upgrade, can i possibly install linux. I dont have CF slot, but i do have pcmcia slot.
Thanks
Joseph |
|
|
|
H/PC Elder Posts: | 1,712 |
Location: | New Mexico, US | Status: | |
| Well ... installing *nix on a CE device does not really require a certain version of wince to be running, although you may need to find the right bootloader for whatever version of wince is running.
If you are flashing your flash rom, then it is irrelevant altogether.
In your case, your device is not flashable, so you need to find a bootloader that runs on ce2.0. I believe your device uses a MIPS cpu so you may try NetBSD http://www.netbsd.org/Ports/hpcmips/
Specs from HP
http://h18002.www1.hp.com/products/quickspecs/10018_div/10018_div.h...
I must take my hats off to HP. They still provide detailed specs, docs, manual, drivers for products long EOLed. HP rocks! |
|
|
|
| Why would you want to put linux on your 2010c windows CE is much better
|
|
|
|
Subscribers H/PC Guru Posts: | 5,713 |
Location: | United States | Status: | |
| to Snappy!: Thanks, I'll try netbsd! And what kind of sync software woulf I need. I cant use activesync!
To Flamin: I plan on trying out linux to see if I like it
Thanks,
Joseph |
|
|
|
H/PC Elder Posts: | 1,712 |
Location: | New Mexico, US | Status: | |
| tenjeangosi - 2005-08-09 12:16 PM
to Snappy!: Thanks, I'll try netbsd! And what kind of sync software woulf I need. I cant use activesync!
To Flamin: I plan on trying out linux to see if I like it
Thanks,
Joseph
First, check on the site to see if your device is supported. http://www.netbsd.org/Ports/hpcmips/
Scroll down and check... ... ok, I checked ... Yes, its supported ...
Quote
Compaq Models
Sold in Model CPU Video RAM Ports Boot PCIC Keymap Xserver
World Compaq2010c 75MHz TX3912 5.9" 640x480x256 8/32 IT8368EY Y Y Y
8bit
World Compaq810 75MHz TX3912 6.5" 640x480x4 mono 8/32 IT8368EY Y Y
World Aero 2100 70MHz VR4111 320x240x256 16/32 Audio Y N PsPC
World Aero 1530 70MHz VR4111 320x240 mono 16/32 Audio Y N PsPC
Japan PRESARIO 213 70MHz VR4111 320x240x256 16/32 Audio PsPC
You just need a CF card reader. Partition a CF card (~256MB ) it to have a small FAT16 partition (~32MB - 64MB ) Copy the bootloader and the bootinstall image onto it. If you intend to install by local directory, ie CF card, copy the other pkgs and binaries onto the CF card, in a directory, say "netbsd".
Run the bootloader and select your bootinstall image, netbsd if ungzipped, netbsd.gz if zipped.
Details here ... ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-1.6.2/hpcmips/INSTALL.html
Remember to backup your settings as installation *will* wipe out your wince from memory. When you do a reset of your device, wince will be restored from rom, so no worries about restoration. |
|
|
|
Subscribers H/PC Guru Posts: | 5,713 |
Location: | United States | Status: | |
| Snappy!,
Can a PCMCIA card work? I dont have a cf card reader.
Joseph |
|
|
|
H/PC Elder Posts: | 2,294 |
Location: | Sunny California | Status: | |
| I'm kind of with flamin on this one...sometimes I like that good old CE 2 (in monochrome ) more than linux on a portable system. Heh, I personally have neve thought of using it on anything slower than 200mhz...that's what DOS and CE are for.
-Good job, you have the H/PC I wanted back in 2000! |
|
|
|
Subscribers H/PC Guru Posts: | 5,713 |
Location: | United States | Status: | |
| to ProgramSynthesiser: Thanks for compliment. Can I install dos on my compaq 2010c
to Snappy!: I could not install linux because of errors. Is there a different linux that will work with my device?
Thanks
Joseph
edit: spell error
Edited by tenjeangosi 2005-08-09 4:52 PM
|
|
|
|
H/PC Elder Posts: | 2,294 |
Location: | Sunny California | Status: | |
| Sure you can install dos! Just get the freedos source and find the source code for all the necessary programs! (Word, other stuff... ) And port it all to your H/PC! We could use a third operating system...
In short, no.
-I wonder if it is possible to port freedos? (Obviously we cannot port word.. ) |
|
|
|
Subscribers H/PC Guru Posts: | 5,713 |
Location: | United States | Status: | |
| To Anyone: IS THERE A LINUX VERSION FOR COMPAQ C-SERIES 2010C OTHER THAN NETBSD AVALIABLE FOR FREE?
Thanks
Joseph |
|
|
|
H/PC Elder Posts: | 2,294 |
Location: | Sunny California | Status: | |
| No need to shout. Stop the hatin!
In short - no. See, the 2010c should be able to run linux, but if you check the jlime forums, it is a bootloader-related problem. CE 2 is missing stuff necessary to run the current bootloader. I believe there will be an attempt to fix this. |
|
|
|
H/PC Elder Posts: | 1,712 |
Location: | New Mexico, US | Status: | |
| tenjeangosi - 2005-08-09 1:01 PM
Snappy!,
Can a PCMCIA card work? I dont have a cf card reader.
Joseph
Yes, it should work. For CF->pcmcia card adapter, go to ze Bay ... tons of them ... |
|
|
|
H/PC Elder Posts: | 1,712 |
Location: | New Mexico, US | Status: | |
| tenjeangosi - 2005-08-09 2:49 PM
to ProgramSynthesiser: Thanks for compliment. Can I install dos on my compaq 2010c
to Snappy!: I could not install linux because of errors. Is there a different linux that will work with my device?
Thanks
Joseph
edit: spell error
What errors did you face? Maybe we can sort it out? |
|
|
|
Subscribers H/PC Guru Posts: | 5,713 |
Location: | United States | Status: | |
| Well, when I customized the Linux bootloader to the Compaq 2010c, I think it said file was corrupt. Sorry, but I dont have my H/PC right now, because it is in a box in storage since we moved from Tucson, AZ, US to Colorado Springs, CO, US . Will try to get box very soon though... |
|
|
|
| hii I got 2 compaq 2010 c but
one of them has not rom how can I use this
how can I take os backup
I try to use romupdate.exe but isnt work
ı try to use linux on pcmci but itsnt work2
|
|
|