NEC MC/HC 300 HC

Hello,

Could you please help to change language in Windows

Thank you in advance!

I don’t believe HPC2000 has a way to change the language like CE4.x can with a MUI pack.

That said, you can get around the language issue with just using third party apps instead that use English.

For example, for file manager, use Total Commander
For spreadsheets, use SpreadCE
For text, there should be several note pad style programs

Also I highly recommend reading our review for the device in full here

https://www.hpcfactor.com/reviews/hardware/nec/mc-300hc/

It’s very informational

Edited by torch 2023-11-08 4:00 PM

Actually, there is a way to convert Japanese HPC2000 devices to English.
A cab made by Geared2003 is there to convert Sigmarion 2 to English.

However, I don't know if this file will work on NEC MC/HC300HC since it seems ARM based, and Sigmarion 2 is MIPS based. It probably would, since it says HPC2000 devices are supported.
Proceed at your own risk and if anything goes wrong, try hard resetting it.

Update: It worked on my Jornada 728 with ARM processor (Strong ARM) so it should work on NEC MC/HC300HC as well. Good luck.
You will need to soft reset after installing for the changes to take place.

Go to the bottom of this thread for the file:
https://www.hpcfactor.com/forums/forums/thread-view.asp?tid=20065&po...

Edited by stingraze 2023-11-09 12:41 AM

Edit: I didn’t see Stingraze already located the file, (the edit didn’t show up for me at the time. My apologies)

Okay. I did some research given what Stingraze brought up.

I found the original thread where this is discussed

https://www.hpcfactor.com/forums/forums/thread-view.asp?tid=5695&sta...

And I found a website (cmomex) archive for the mui pack

https://web.archive.org/web/20070526132125/http://hpcmonex.net/gear/...

Edited by torch 2023-11-09 4:34 AM

Thanks for finding the original thread and the cmonex site archive.
And there, it says it's CPU independent, so it should work.

-stingraze

Thank you so much!