|
Factorite (Junior) Posts: | 29 |
Location: | Czech Republic | Status: | |
| I've tried on my Jornada 720 older version og ClearVue Presentation (2.11) and standard VGA-out card from HP (F1252A) was not detected.
Has anyone some experiences with this combo? | |
| |
Subscribers H/PC Guru Posts: | 5,661 |
Location: | United StatesĀ | Status: | |
| I am not sure if ClearVue will work with CE. I looked in the Hardware section here and could not locate it... The HP should work, as drivers are in *HP* HPC2000 ROM Files... | |
| |
H/PC Elite Posts: | 627 |
Location: | The Matrix | Status: | |
| Try the new Clearvue (the one designed for PPCs, specifically the PPC2002 one), just add the 16.5 aygshell in the mix and you're done. It works like a charm, and the menus are all in place.
it's compatible with the following cards (first two tested personally)
-HP VGA OUT
-Margi Presenter-to-go
-Colorgraphics voyager
and it's NOT compatible with this others
-Prolink PK201/PK203
I've the unregistered cabs for it, maybe you could them useful. If you do, let me know so i can post them in my page. | |
| |
Factorite (Junior) Posts: | 29 |
Location: | Czech Republic | Status: | |
| You are very kind, contact to me: zampach@volny.cz
Pavel | |
| |
Factor Fanatic Posts: | 71 |
Location: | United States | Status: | |
| Does anyone have a source for the files mentioned by Matrixcore in old message above (11 years ago), for Westtek Clearvue (the one designed for PPCs, specifically the PPC2002 one)?
If so, does anyone know if this will really work on Jornada 720?
And... if it does happen to work, is there a way to register the product? (Judging from their website, it doesn't look like Westtek supports it anymore. But I have not contacted them directly.)
Thanks,
Dave | |
|
Seconds to generate: 0.187 - Cached queries : 43 - Executed queries : 30
| | |
|