x
This website is using cookies. We use cookies to ensure that we give you the best experience on our website. More info. That's Fine
HPC:Factor Logo 
 

Neko ProjectII (PC-98 Emulator) 0.81a

by NP2
Freeware
PC-98 Emulator for Windows CE
You must be registered and logged into HPC:Factor in order to contribute to the SCL.

Screenshots & Images

Screenshot of
Screenshot of
Screenshot of
Screenshot of

Description

Neko Project II
NP2 developer team, 1999-2001,2003,2004


·Overview

Based on the PC-9801VX21, the main functions of the PC-9801 series can be
This is an emulator to reproduce.

Neko Project II reproduces his PC-9801 series standard hardware and
Only some BIOS and C bus devices.
For this reason, MS-DOS etc. will work, but those that use ROM such as N88-BASIC and LIO
Doesn't work as standard. In order to operate these, it is necessary to acquire ROM from the actual machine.
I have.



·Recommended operating environment

ARM 206Mhz or higher
WinCE 2.11 or higher
10MB or more of free memory

PocketPC and Sigmarion3 require gx.dll.
(Already installed in PocketPC2002 from the beginning)



·how to use

He needs a floppy image to use Neko Project II.
Please make an image based on the information on the web.

After that, start the binary that matches the model of np2hpc/np2ppc/np2sig3.

To start the floppy-based software, select
After selecting [FDD1 - Open], [FDD2 - Open] and inserting the disk image
Please reset.

To use the hard disk From [Emulate - Newdisk], select the hard disk
After creating the image, open the image file from [HardDisk - SASI-1 - Open]
After selecting, please reset.
The usage information of the hard disk image is memorized, so the image file
This operation is not necessary unless you want to change it.

CPU is 80286 (real mode only).
Please note that protected mode cannot be handled when building an environment.
Also, with DIP SW3-8 OFF, he moves like a V30.
CPU speed can be changed in Configure.

After executing and changing the settings, an np2.cfg file will be created.



·menu

Emulate
Reset Hardware reset.
Open the Configure settings.
Exit Exit Neko Project II.

FDD1
Open Select the disk image of drive 1.
Eject Take out the disk image of drive 1.

FDD2
Open Select the disk image of drive 2.
Take out the disk image of eject drive 2.

Hard Disk
SASI-1
Select the Open SASI-1 hard disk image.
Remove SASI-1 to the non-connected state.
SASI-2
Select the Open SASI-2 hard disk image.
Remove SASI-2 to the unconnected state.

Screen
Disp Vsync drawing timing (when Vsync is checked)
Real Palettes palette update timing (check for each raster)
No Wait No timing is taken.
Auto frame Automatically determines the display timing.
Full frame Displays all frames.
Draw once every 2 times in 1/2 frame.
1/3 frame It draws once every three times.
1/4 frame It draws once every 4 times.
Screen option Open the screen settings.

Devices
Keyboard
Keyboard Handles the numeric keypad as a keyboard.
JoyKey-1 Assign the numeric keypad to joystick 1.
JoyKey-2 Assign numeric keypad to joystick 2.
MouseKey Assign the numeric keypad to the mouse.
Machine SHIFT Note-style mechanical shift.
mechanical CTRL Use note-like mechanical control.
Meanical GRPH Use a notebook-like mechanical graph key.
Sound
Beep off Mutes the beep.
Beep low Decrease the beep volume.
Beep mid Set the beep volume to medium.
Beep high Increase the beep volume.
Disable boards Do not use the FM tone generator board.
Use the PC-9801-14 music generator board.
Use the PC-9801-26K PC-9801-26K board.
PC-9801-86 Uses the PC-9801-86 board.
Use PC-9801-26K + 86 PC-9801-26K and 86 board.
Use PC-9801-86 + Chibi-oto PC-9801-86 board and Chibi-oto.
Use the PC-9801-118 PC-9801-118 board.
Use the Speak board.
Spark board Use the spark board.
AMD-98 AMD-98 is used.
Use JAST SOUND JAST SOUND.
Seek Sound Disc seek timing is taken.
Memory
Uses 640KB memory only for main memory.
Uses 1.6MB main memory and 1MB extended memory.
Uses 3.6MB main memory and 3MB extended memory.
Uses 7.6MB main memory and 7MB extended memory.
Mouse Switch the mouse operation.
MIDI panic MIDI is muted.



·Setting dialog

Configure
CPU
Base Clock Specifies the base clock of the CPU.
Specify the clock ratio of Multiple CPUs.
Architecture
It is an NEC specification equipped with a CPU before PC-9801VM V30.
The PC-9801VX is an NEC specification equipped with i286 or later CPU.
It will be a PC-286 EPSON compatible machine specification.
Sound
Sampling Rate Specifies the output frequency of the sound.
Buffer Specifies the buffer size of the sound.
Resume Use resume function.

Screen option
Video
LCD It becomes the liquid crystal mode of the PC-98 notebook.
Reverse the LCD display.
Use skipline rev Correct the skip line.
Ratio Specifies the brightness of the skip line.
Chips
GDC Specify the GDC chip.
Specify the GRCG GRCG chip.
Enable 16color Enable analog 16 colors.
Timing
Specify the T-RAM text RAM access wait value.
V-RAM Specifies the video RAM access wait value.
GRCG Specifies the access wait value when using GRCG.
RealPalettes Adjust Adjust the timing for RealPalettes.



·Disk image

Corresponds to the image below.
FDD - D88 format, XDF (solid image) format
SASI - THD format (T98), HDI format (Anex86)



·Key settings
In the same folder as bios.rom (it differs depending on the model, so this way of writing...)
Create a text file with the name key.txt and fill in the key settings.

format)
[keyname] = [key1] (key2) (key3)
[keyname] [TAB] [key1] (key2) (key3)
userkey[1-2] = [key1] (key2) (key3) ... (key15)
Full key 0-9 A-Z - ^ \ @ [ ] ; : , . / _
STOP COPY ESC TAB BS RET SPC XFER NFER
INS DEL RLUP RLDN HMCL HELP
Funk F1-F10 VF1-VF5
Numeric keypad [0] to [9] [-] [/] [*] [+] [=] [,] [.]
Shift

SHIFT CAPS KANA GRPH CTRL

It is possible to simultaneously press 3 normal keys and 15 userkeys.
[=] The key is separated by =, so separate it with TAB or use [EQU].

example:
----------------------- key.txt

W = UP (Try using the diamond key as the cursor...)
S = LEFT
D = RIGHT
X=DOWN
[7] = [4] [8]
[9] = [6] [8]
[1] = [4] [2]
[3] = [6] [2]
userkey1 = CTRL XFER (CTRL+XFER FEP switching)
userkey2 = D O A Z (Press D+O+A+Z simultaneously)

-----------------------



Since there are many points in common with the Windows version, please also see the Windows version help.
http://www.yui.ne.jp/np2/help.html


Email: np2@yui.ne.jp
Webpage: http://www.yui.ne.jp/np2/

Tags

emulatoremulationpc98pc-98

   
License Freeware
The program is completely free to use.
   
Website https://www.yui.ne.jp/
Not working? Try this website on the WayBack Machine
   
Popularity 1783
Total Downloads  5
   
Submitted By torch
Submitted On 07 November 2022

Comments

No comments have been submitted against this application. Be the first!

You must be signed-in to post comments in the SCL. Not registered? Join our community.

Software Compatibility List: The SCL is provided for free to the Handheld PC Communty and we do not carry advertising to support our services. If you have found the SCL useful, please consider donating.