Hi Folks,
I posted a similar inquiry just a moment ago... here is what I have:
The "no sound" part is where my interest comes in... I believe that the change in RED in the "script" file below is needed; however, all of the editing techniques that I have tried leave the script file in a state that it is ignored upon trying to reboot. Do you have any suggestions? Your help would be greatly appreciated.
Best Regards,
J
script file exerpt:
'V|U÷WL¼/S
‹ ˆ¨»ïScript Created by Win32
ƒ setenv lcdparam 1,30000,8,800,480,48,40,40,3,29,13,d8110508|10,d8110504|10,d8110500|10
setenv board_name WM8505_YaZhongXun+ES8328+cs7146
setenv TouchIC 0
setenv NoBootProgressBar 0
setenv NoBootInformation 0
setenv adcbasevolt 2500
setenv battery.ic cs7146
setenv battvoltlist 6830,7286,7410,7503,7575,7636,7720,7861,7953,8018,8190
setenv bLowVoltShutdown 1
setenv audio.recordselect LineIn
setenv audio.gpio 3
setenv audio.ic ES8328
ES8328 must be changed to VT1613
setenv pwmparam 0,25,100,90,98,38,8,0,27
PS:
The script and all the trimmings are from WinCE.rar found here:
http://netbook.poodwaddle.com/
It seems to have the most Windows-like features that I have found, but does a setenv for a sound chip that is different from my hardware...
BTW: can I overwrite the setenv command parameter in the already running OS? That would seemingly be quick and easy.
Thanks again,
J