Bluetooth On MP900c

So I have a problem. Every cab from your package do the same as H/PC2000 (I need to change coredll into coredl2 and widcomm don't detect my card). Anycomm also not detect. My card is recognized as Pretec BT2000E (its rebanded Ambicom BT2000E), its at COM7 port (I loog inot PHM device manager )

anycom is anycom, proprietary.

this pretec may not be widcomm then.

do you not have the original pretec driver anywhere??

Edited by cmonex 2007-09-20 1:40 PM

No, somebody gives me only Nec+ac adapter+wifi card+bt card. Nec was very damaged but I run it. CF slot is working, I tested it with some CF memory cards.

All what I find on google is drivers for Sharp Zarus

this thread says there were ppc2002 drivers only: http://www.totalpda.co.uk/forum/showthread.php?t=1295


it also works on newton http://40hz.org/Blunt/

Edited by cmonex 2007-09-20 2:02 PM

Why I have Newton MessagePad 100, not 2100

But why your custom rom has drivers for it?

btw: look at @

Edited by kitor 2007-09-20 2:06 PM

what drivers do you mean?

thanks for emails

My nec detect this card (don't ask for driver name, card is exist in System tab and in PHM Device Manager I've got BT ports)

i never put bt drivers in the rom.. nor did NEC. maybe one of the bt drivers you were experimenting with didnt uninstall fully

the best think is that I insert card after HR and it detect it

very interesting...

Is there any chance at all of a usb bluetooth adapter working?

Edited by tonymac32 2007-09-20 8:39 PM

Hi cmonex

Many thanks for the driver for the AnyCom card. I'll let you know if it works.

Regards

Patrick

See the answer on page 2 of the thread - basically no, at present. This would be nice though, i have many widcomm usb dongles, and to be able to actually use the CF slot for storage at the same time would be good.

cmonex, can you help me with the hacks to Widcom Bluetooth driver to get it on USB port? and, can I use an USB Hub with the 900c?

That would be awesome!