Accessing USB storage on the Intermec

Plugging any type of USB storage into the Intermec 6651 just leads to a popup asking for the name of the driver, which I don't seem to have. Is it possible to connect USB storage to an Intermec?

There is evidence:

https://www.hpcfactor.com/forums/forums/thread-view.asp?tid=89&start=30#M12624

And C:Amie's original post:

https://www.hpcfactor.com/forums/forums/thread-view.asp?tid=89&start=0#M684

And the drivers on the wayback machine:

https://web.archive.org/web/20070103091648/http://www.softclub.jp/~zoro/ce/usb020522.lzh

Good luck.

Edit: Dunno why the C:Amie link isn't working. Just go here:

https://www.hpcfactor.com/forums/forums/thread-view.asp?tid=89&start=1

and scroll down for his post.

Edited by thenzero 2023-09-22 2:53 AM

I appreciate the response! Sadly it isn't working for me, I've added the DLLs and the registry entries but it still just asks me for the name of the driver

According to some of the other posts in that thread, the driver is very picky about the particular USB device. I have found this to be true on the Sig3 as well. If you haven't already, try a few other USB sticks and drives and see if any of them work.

p.s. I know it sounds trite but it really did work for me!

No guarantees, but have a go with the Clik driver in the HCL

Oh my god that works flawlessly!! When it asked me for the driver name I told it usbclik.dll, and it works