NSbasic for Windows CE 2.0

Many thanks for your help and the time invested. I tried the install from the Win XP environment ("Installers...") but that was before I had wiped my 620LX clean (hard reset). I still have the IDE on my Windows XP machine so this is an option to try.

Hakan

Okay, it's a little confusing, but here's what to do-
go here
https://www.hpcfactor.com/scl/1110/NSBasicCE/NS_Basic/CE/version_6.0
download
NSBasic_CE_v6.exe
install that file, add the serial number 246gt when installing

After installing, go to Program Files/NSBasic/CE/Installers

then install all of the setup files + install cab files for the following as needed, for example, Script, System, MGCE, etc

Then that should get you a working installation I believe

It worked!

Many thanks for your help torch!!!! You are a champion!

Due to the German version of my HP620 there are files spread all over the standard folders. (Apparently some folder paths are hard-coded for English language WinCE. But that is of no importance now that the installation is working.)

Here is a picture of the installation:






Attachments
----------------
IMG_1021.jpg (603KB - 0 downloads)

Perfect! I’m glad you got it working.
Too bad version 7.0 doesn’t seem to have an IDE available for CE2.0.