Hello,
I use Cisco Aeronet 350 with Jornada 680e without any problems. Here's what I did:
+ Install ActiveSync 3.7.
+ Connect 680e to my XP PC using provided serial cable and confirmed connection.
+ Download Cisco Driver from on your PC:
http://www.cisco.com/pcgi-bin/Software/Tablebuild/doftp.pl?ftpfile=cisco/crypto/3DES/wireless/aironet/utilities/ce/21/WinCE211-PCMCIA-LMC-v223.exe&swtype=FCS&software_products_url=%2Fpcgi-bin%2Ftablebuild.pl%2Faironet-utils-ce21&isChild=&appName=&tbtype=aironet-utils-ce21
Note: Also, download corrosponding PDF file for useful driver installation instructions.
+ Double click on installation file for drive which fires up installation of drivers,etc. through ActiveSync on your 680e.
At the end, it asked me to replace one of the DLLs on 680e
(forgot the name
) which I said go ahead to replace w/ new one.
+ Run Cisco Aeronet client utility. I set SSID field to correct value
(depends on your router and/or access point
). For Linksys, the default value is "linksys".
+ Under Control Panel/Network Configuration, click on Identification tab. Make sure there is no User/Password listed.
Rest I left as it was as I use DHCP
(no need to specify static IP,etc.
).
Hope this helps. Let me know if you have any other questions on this card.
Regards,
Thanks in advance.
JohnnyL
HP Jornada 680e
Cisco Aeronet 350 Wi-Fi Card
Linksys BEFSR41
Linksys WAP11 Access Point