Cmonex, The Socket driver is the one you linked me to about 1 month ago.
Ok basically I did it the same way as they do in pocket PC`s
(though I think the entry exists in PPC`s as std and you just add a path
).
I used TRE and Total Commander.
My hint before doing this is probablly follow my method. I moved one dll to directory on the SD that made a single program stop working. I was then able to make sure my registry entry worked by soft re-set and running the program to see if it was worked again. Once happy you can move rest of dll`s
1. I created a directory on my sd card. You can call it whatever you want but I went for 'SD Card\sys'
2. In TRE I created a new key in HKEY_LOCAL_MACHINE called 'Loader'
3. I tapped loader in TRE and created new multistring called 'SystemPath'.
4. Double tap on the new multistring you just created. in the data entry boy that appears pop \Windows\ on line one. Hit return and pop \SD Card\Sys\ then click on OK
5. Using Total Commander I went to the windows directory
( in TRE`s show menu I clicked hide files in rom. Then I simply cut and pasted all dll`s left showing from Windows to Sys on the SD card.
6. Lastly Soft Reset.
7. go to system in control panel and adjust slider as you will have gained lots of ram.
Job done
PIE over wi-fi seems to be quicker and I have lots more room in ram. I belive you can also relocate and exe files not in rom from windows dir to sd with this change as well
(but It may also require you to edit links and I havn`t tested it
).
My only issue so far is occasionally when turning on the unit my wi-fi card doesn`t always load the driver
(though if I just remove and replace it all is ok. In my mind it is probs because it sometimes tries to load the driver before sd is running but for me the 8.5Mb extra memory and speed-up in internet browsing on wi-fi is more valuable than this small inconvenience.
Enjoy
John