x
This website is using cookies. We use cookies to ensure that we give you the best experience on our website. More info. That's Fine
HPC:Factor Logo 
 
Latest Forum Activity

Need Help Urgent

code_ksa Page Icon Posted 2009-03-21 11:29 AM
#
Avatar image of code_ksa
H/PC Newbie

Posts:
5
Status:


Hello Dear All
I am new on this forums and i hope can i find solutions for my problem her

i got an error msg in Chinese when using the gps , since then i cannot get to the normal gps screen
Even after a reset or pulling the power, it gets stuck in the gps boot screen, the red progress bar starts but when it get to the end, it stays there.
Is there a way to do a hard reset on these units ?. I thought since it is like a PDA, there might be a hard reset solution?
also is there any way to make boot from SD/MMC card? to run windows ce 5 or any idea
please i need help
it is Made in Chinese

Thanks for all

This is the picture for it
[img][/img]


 Top of the page
martinax85 Page Icon Posted 2009-03-21 3:44 PM
#
Avatar image of martinax85
H/PC Newbie

Posts:
4
Status:

Hard to say about the hard-reset, but if there is a soft-reset
button (small one that you need a pin to press), perhaps trying
to hold that with the power-button for like... 15 secs?

 Top of the page
code_ksa Page Icon Posted 2009-03-22 8:16 AM
#
Avatar image of code_ksa
H/PC Newbie

Posts:
5
Status:
Quote
martinax85 - 2009-03-21 3:44 PM


Hard to say about the hard-reset, but if there is a soft-reset
button (small one that you need a pin to press), perhaps trying
to hold that with the power-button for like... 15 secs?



HELLO Martinax85

i am very happy for your replay
but i am try to find small hole as you told but i can't find it on that device
so can you help me to find any way to make boot-loader from my SD/MMC card?
is it possible to do it ?

Thanks again for help and i hope with next reply find nice solution
 Top of the page
Rich Hawley Page Icon Posted 2009-03-22 8:39 AM
#
Avatar image of Rich Hawley
Global Moderator
H/PC Guru

Posts:
7,188
Location:
USA
Status:
Without a way to reset the device, there is nothing you can do to load or change anything. Try this: hold down the mode button while turning on the power button. If that doesn't do anything, try each of the other buttons doing the same thing, try all the different combination of buttons while turning on the power. Sometimes they act in unison to perform a reset.

It may be that there is an internal rechargeable backup battery not accesible except by taking the unit apart that has to be taken out to perform a hard reset.
 Top of the page
code_ksa Page Icon Posted 2009-03-22 3:32 PM
#
Avatar image of code_ksa
H/PC Newbie

Posts:
5
Status:
Quote
Rich Hawley - 2009-03-22 8:39 AM

Without a way to reset the device, there is nothing you can do to load or change anything. Try this: hold down the mode button while turning on the power button. If that doesn't do anything, try each of the other buttons doing the same thing, try all the different combination of buttons while turning on the power. Sometimes they act in unison to perform a reset.

It may be that there is an internal rechargeable backup battery not accesible except by taking the unit apart that has to be taken out to perform a hard reset.


thanks dear for replay

i'll try and same as you told and i get back for you with last news

 Top of the page
code_ksa Page Icon Posted 2009-03-23 7:12 AM
#
Avatar image of code_ksa
H/PC Newbie

Posts:
5
Status:
hello

sorry nothing change after press mode key
what the next step
 Top of the page
martinax85 Page Icon Posted 2009-03-23 7:43 AM
#
Avatar image of martinax85
H/PC Newbie

Posts:
4
Status:
The only thing I could think of was to find the two buttons that together
work as a hardreset, you may have to hold them (try holding any
2 key combinations for 10-15 seconds).



Edited by martinax85 2009-03-23 7:43 AM
 Top of the page
code_ksa Page Icon Posted 2009-03-23 3:22 PM
#
Avatar image of code_ksa
H/PC Newbie

Posts:
5
Status:
Quote
martinax85 - 2009-03-23 7:43 AM

The only thing I could think of was to find the two buttons that together
work as a hardreset, you may have to hold them (try holding any
2 key combinations for 10-15 seconds).



Thanks again for replay

i tray hold all buttons nothing change sorry for say that but that is the true

is any their any way to boot from my SD card?
or make wince portable and make boot form the SD?

Thanks
 Top of the page
Jump to forum:
Seconds to generate: 0.156 - Cached queries : 64 - Executed queries : 10