Jornada 680 Internet Trouble, Please Help

I'm not sure if this is the right place for this thread but I didnt see a section for windows ce 3.0. I recently bought a jornada 680e from a well-known online store, the device works great but I can't figure out how to set up the Internet on it. I curently have people pc for an ISP. If anyone can help me with this it would me much appriciated. Thanks

Moved to Windows CE 2.11 H/PC Pro Support

The Jornada 680 is a CE 2.11 device, not a CE 3 device. If you were sold it as a CE3 device, it was missold.

what kind of internet connection do you want to use? dial-up, lan, wlan, gprs, or..?

I am wanting to use my people pc dial up account. Thanks

C:Amie, I followed the instructions in the link that you posted, but when I dialed out I got an error message "No carrier detected verify phone number". Any suggestions? thanks

The most common reason for this error is that the device couldn't find a dial-tone. Did you install and correctly specify your modem during the wizard?

I inserted my extra PCMCIA fax modem into the pc card slot and selected it during the wizard, so I am assuming it is installed correctly. Is there anything else I need to do to it. Thanks

Nope, that should be it.
If you pick up the handset when you hit the 'connect' button, do you hear the modem squark?

Yes for about 15-20 seconds.

Very well, a good start.

When you double tap on your Dial-up entry in Remote Networking, on the right hand side at the top will be "Phone:"

Is that number correct, or has it been prefixed by a "9," an exra "0" or is it completly wrong?

The number on the device reads T120618702770020. The correct access number is 870-277-0020.

There you go then, change the dialing rule to home and set it up for your situation

lol good question, how to remove the T from the beginning? what is that T for, anyway?

Edited by cmonex 2005-06-21 6:35 PM

C:AMIE, I changed the dialing number as you said and now the device connects but dissconects within 3 seconds. Any advice? Thank you.