|
Factorite (Elite) Posts: | 230 |
Location: | Bucharest | Status: | |
| Hi everybody! I recently faced a restore problem with my J720, meaning that while doing a complete restore (after a proper hard reset) I got the message that I do not have enough memory. Restoring from the previous back-up file (smaller) works OK.
I think that the problem comes from the fact that I was playing with installing programs in the HPC memory and didn't bother to move them to the card, so that both memories were about 70% to 80% filled-up. Did anybody face the same problem?
Any idea on how to restore from that particular (final) back-up file?
Of course I have the solution to restore from the previous back-up and re-install again the difference programs, but this is time consuming. Moving the program files to the card would be the first thing.
Thanks
Edited by arlex 2010-06-23 6:46 PM
| |
| |
Factorite (Elite) Posts: | 230 |
Location: | Bucharest | Status: | |
| I've found the cure: moving the memory allocation cursor 3 quarters to the right towards Program Memory solved the issue. Good to know.
Now I'll have to move the Program files to the CF card, except Opera.
Edited by arlex 2010-06-23 7:46 PM
| |
|
Seconds to generate: 0.156 - Cached queries : 43 - Executed queries : 27
| | |
|