I'm new here, so Hi all
1st of all, want to say: great site, i've found alot of usefull info here!
Recently i bought a Jornada 720 and i'm pretty happy with this device, but... no usb host here.
So, i did some search about this and that's what i've found:
as we know J7xx series based on SA-1110+SA-1111 companion chip that DOES have USB HOST function, but it's not wired to the usb connector. Also there is an
article on JLime site about how to wire the usb connector out of the sa1111 chip. So far we know that provided wiring is correct and the main problem is the driver. So i googled abouta other pda that based on the same pair as Jornada
(sa1110+1111
) and found this:
EzPad
Model: EZPAD
OS: CE .Net 4.1
CPU: StrongARM
SA-1110 -206MHz
(233MIPS
)
Companion Chip: Intel
SA-1111
Display: 8.4” TFT, 65k colors, SVGA, Landscape and Portrait mode available, touch display
Memory: 64mb RAM and 16 MB Code ROM with 32MB Data Flash
...
Expansion:
USB Host x 1
(Type A
), Slave x 1
(for PC Sync.
), CRT Out, Type II PC Card Slot, RS-232 Port
The OS installed on this device is CE Net 4.1. So there is a question: is there a chance to use a driver from this device on Jornada with wince 3.0 to get the usb host working? And is there a chance
(at all
) to copy\dump that dll driver from it? I can do all the hardware "wiring\soldering" part and test it if someone can provide me with a driver.
If somebody knows other "driver-source"devices like this or where to get this driver in other way - let me know
Correct me if i was wrong somewhere please...
thanks