|
H/PC Newbie Posts: | 7 |
Location: | Ukraine | Status: | |
| Please help me with disassembling Ericsson MC-12. I have no problem with display cover, but i cannot take off back cover. Thank's a lot | |
| | |
Administrator H/PC Oracle Posts: | 17,996 |
Location: | United Kingdom | Status: | |
| Back cover of the screen or the base? | |
| | |
H/PC Newbie Posts: | 7 |
Location: | Ukraine | Status: | |
| Back cover of the base... my serial port was broken, and i need to fix it... | |
| | |
Administrator H/PC Oracle Posts: | 17,996 |
Location: | United Kingdom | Status: | |
| The pressure points are on the clips visible in the battery compartment, they pop the hinge cover off. Take out all of the screws and tease off the hinge cover. The rest of it is just clips. | |
| | |
H/PC Newbie Posts: | 7 |
Location: | Ukraine | Status: | |
| mc-12 has only 2 screw in battery compartment isn't it? | |
| | |
Administrator H/PC Oracle Posts: | 17,996 |
Location: | United Kingdom | Status: | |
| Yes, but you will obviously need to get all screws out from the device. It has been many years since I pulled one apart, so I can't remember where they all are. However I do remember the difficult part was popping the hinge aparatus. | |
| | |
H/PC Newbie Posts: | 7 |
Location: | Ukraine | Status: | |
| Everything is OK... Thank's a lot | |
| |
Seconds to generate: 0.171 - Cached queries : 64 - Executed queries : 9
| | |
|
