Aha, me again. well, if you are dissembling a HP320LX to see what's wrong.. .. It seems my aquisition, is about 15 years old. so its not valuable, so...Ericsson MC12, case, I undid the two screws in the battery section, then 'poped' the case all round off using ONLY my FINGENAIL, so's not to danage the clasps. After removing the main board
(2 screws on left. , clips , and 2 connectors
): , display on top and kbd underneath
(very tricky connector to get back in.
) and cleaning contacts the It seems there are three screws holding the kbd, but they are under the stick-on kbt cover on top. so with a scalpel or razor, CAREFULY peel back to get at the screws. It can come off in one piece, you could yuse a gente heat from a room heater to assist. photos to follow soon.