|
H/PC Newbie Posts: | 8 |
Location: | United States | Status: | |
| Hi folks,
This is my first post as I'm new to HPC factor and I have a question for everybody.
I own an NEC MobilePro 790 which I just love, but it seems to have developed a glitch. When you try to launch Pocket Access you get the following error message. "Unspecified Error '0x80070019'" When you press the OK button, Pocket Access terminates itself and closes.
I've tried a soft reset and that didn't help. I could perform a hard reset, but that's kind of a last resort, I really don't want to have to reinstall some 20+ MB of software/documents.
Any thoughts ladies and gentleman?
Thanks in advance for any help you folks can provide.
Tim | |
| |
Administrator H/PC Oracle Posts: | 18,043 |
Location: | United Kingdom | Status: | |
| Unfortunately error 2147942425 is a file system error. In your case, it is going to mean that the virtual file system shadow of the ROM has become corrupted. Sadly a hard reset is going to be the fastest way around it.
If you use a backup utility, you can save yourself a headache. | |
| |
Global Moderator H/PC Guru Posts: | 7,188 |
Location: | USA | Status: | |
| Which brings up the point that you got lucky. You could have gotten an error where the entire Mobilepro wouldn't boot or auto-hard reset itself. You've been given a gift...that gift is the opportunity to backup all your files.
Time to do it while you can. | |
| |
H/PC Newbie Posts: | 8 |
Location: | United States | Status: | |
| Well, I ran a backup using ActiveSync 3.8, hard reset the mobilepro and Pocket Access worked fine. However, after restored it I still get the same error message. Apparently ActiveSync backed up and restored the corrupted ROM file system...lol. I guess when I have time I'll hard reset it again and reinstall everything back onto it one program at a time. | |
| |
Global Moderator H/PC Oracle Posts: | 12,674 |
Location: | Southern California | Status: | |
| That suggests that something you installed created a conflict. Have you installed any other programs using the ADOCE or eVB runtimes? (Some of the latter also use the ADOCE files as well. ) | |
| |
Administrator H/PC Oracle Posts: | 18,043 |
Location: | United Kingdom | Status: | |
| It won't have corrupted the ROM, but something in the shadow. A patch file, some sort of corruption got copied through the AS image. Did you install anything specific to update office? | |
| |
H/PC Newbie Posts: | 8 |
Location: | United States | Status: | |
| The only thing I can think of that may have corrupted any of the DB files would be that I tried out Spread CE and also another database program, simply called Data. Perhaps one of those caused the problem. But all is good. I had a day off yesterday and I'm kind of OCD with the programs I have installed, their cabs are all in a single folder on my laptop's hard drive. Anyway, I hard reset the mobilepro again and just took the time (about 6 hours) to reinstall everything one program at a time and all seems good. Access is running properly again. In fact the whole HPC seems to be running a bit faster/smoother. Maybe it was worth the effort. I also made a fresh backup file with ActiveSync, so I'll be ready in the future if something wacky goes wrong. Thanks for the help and suggestions guys, I really appreciated it.
Tim | |
|
Seconds to generate: 0.219 - Cached queries : 64 - Executed queries : 12
| | |
|