My PHH docking cradle has stopped working.
I took it apart (removed the six screws at the back and prised it apart) and saw that a couple of the thin wires had come away from the solder point.
I need to solder them back on, but don't know which wire goes where!!!!!
Would any PHH owner be willing to look inside their cradle and either document where each wire goes or take a picture of it for me????
mmarks, is there any chance you could send me some high res photos of the mainboard? It'll save me having to acquire some TX05 (or is it TX04) screw drivers and ripping mine apart .
blaznc
blazncPosted 2005-10-11 3:12 AM
#
Status:
Yes I would like to see the internal pics as well if you have any. Thanks!