Ok, here's the question. I have what was a Dutch Railroad 680e but I've modified it
(replaced the case, added the audio buttons
) and made it a 680
(without the modem...don't need it
).
Ok, works great. I've got a 256M CF card in the bottom and a Wireless card in the PCMCIA slot. Both work fine.
So what's the problem...just a minor cosmetic problem. I wasn't sure how the 4 "hold down" springs worked against the CF card holder. So I simply opened the CF card holder when I put the case back on and set it so the 4 springs sit on the metal plate. Sort of works ok, but looking at it...you can see the springs are really NOT sitting the way they should be. When you install the PCMCIA card, you can see the springs are sitting a bit sideways. I'm sure that although this works ok, there is a better way.
So ... that the question, does anyone know the official way to install the CF Card holder
(NOT the card itself..the card holder!
)
and properly set the springs?
Thanks in advance,
Don
Edited by donc13 2005-08-09 5:07 PM