|
H/PC Newbie Posts: | 5 |
Location: | Hungary Szekesfehervar | Status: | |
| Hi everybody!
I've tried use AantgoClientCE on Nec MP 900C but it didn't work 
Steps:
1, install agce.exe (avantgo client and mobile link-sync apps- )
2, used htmlview.dll->copy to windows folder (important!!not run without htmlview.dll )
3, set the mobile link application
4, sync with mobile link on hpc
5, the program started
Problem:
The client doesn' show te synced chanels
WHAT I'AM DOING WRONG? I need help 
Edited by mz_ 2006-02-02 2:27 PM
|
|
| |
|
Subscribers H/PC Guru Posts: | 5,749 |
Location: | United States | Status: | |
| I believe there is no ARM version of AvantGo for the H/PC... You may have to hack the Pocket PC Version onto your MP900c... By the way, your MP900c has an ARM processor...
EDIT: What version of AvantGo are you using...
Edited by tenjeangosi 2006-02-02 4:10 PM
|
|
| |
|
H/PC Oracle Posts: | 16,175 |
Location: | Budapest, Hungary | Status: | |
| tenjeangosi - 2006-02-02 10:06 PM
I believe there is no ARM version of AvantGo for the H/PC... You may have to hack the Pocket PC Version onto your MP900c... By the way, your MP900c has an ARM processor...
EDIT: What version of AvantGo are you using...
yes there is a hpc arm version...
he's trying exactly what you're talking about...  |
|
| |
|
Administrator H/PC Oracle Posts: | 18,005 |
Location: | United Kingdom | Status: | |
| Which version / build of AvantGo and where did you down load it? |
|
| |
|
H/PC Elder Posts: | 1,953 |
Location: | BC, Canada | Status: | |
| Just use the PPC version. There's no hacking needed.
I just did a hard reset and restore (another story) on my SmartBook, which is also a CE .Net 4.2 device like your NEC. Just installed Avantgo now. My version is 5.7 Build 53 (an old download), worked straight away. |
|
| |
|
H/PC Newbie Posts: | 5 |
Location: | Hungary Szekesfehervar | Status: | |
| i've download on yeatherhomej7xx with direct link to avantgo page
Version: 3.3.403 |
|
| |
|
H/PC Newbie Posts: | 5 |
Location: | Hungary Szekesfehervar | Status: | |
| Thanks
I,ve trying out now |
|
| |
|
H/PC Oracle Posts: | 16,175 |
Location: | Budapest, Hungary | Status: | |
| takwu - 2006-02-03 4:27 AM
Just use the PPC version. There's no hacking needed.
I just did a hard reset and restore (another story) on my SmartBook, which is also a CE .Net 4.2 device like your NEC. Just installed Avantgo now. My version is 5.7 Build 53 (an old download), worked straight away.
does your smartbook have htmlview in rom? |
|
| |
|
H/PC Newbie Posts: | 5 |
Location: | Hungary Szekesfehervar | Status: | |
| cooooool!
The client to run and show the synced chanels
Many thanks all idea  I'm very happy
|
|
| |
|
Administrator H/PC Oracle Posts: | 18,005 |
Location: | United Kingdom | Status: | |
| I had a sneaking suspicion this was the case |
|
| |
|
H/PC Elder Posts: | 1,953 |
Location: | BC, Canada | Status: | |
| cmonex - 2006-02-03 2:30 AM
takwu - 2006-02-03 4:27 AM
Just use the PPC version. There's no hacking needed.
I just did a hard reset and restore (another story) on my SmartBook, which is also a CE .Net 4.2 device like your NEC. Just installed Avantgo now. My version is 5.7 Build 53 (an old download), worked straight away.
does your smartbook have htmlview in rom?
No it doesn't. I think the more recent versions of Avantgo simply don't need htmlview.dll. I know some of the older versions did... weird, I know. |
|
| |
|
H/PC Oracle Posts: | 16,175 |
Location: | Budapest, Hungary | Status: | |
| takwu - 2006-02-04 2:38 AM
No it doesn't. I think the more recent versions of Avantgo simply don't need htmlview.dll. I know some of the older versions did... weird, I know.
i see this again shows that for hacking you may find other versions of the same app more compatible either newer or older ones hehehe |
|
| |
