|
| hey all, my Mobilepro 780 is experiencing violent vibrations in the display. the tremors are very fine, it creates a buzzing sound. i recall dropping the device once, but that was from my hand onto a carpetted floor. has anyone experienced anything like this? any way to fix it?
...Z | |
| |
Administrator H/PC Oracle Posts: | 18,041 |
Location: | United Kingdom | Status: | |
| Could be an earthing short
Could be a power Surge
Could just be on its way out | |
| |
Factorite (Elite) Posts: | 221 |
Location: | Western NY, USA | Status: | |
| ouch. i was about to get the upgrade too
.....Z
Edited by Jornada 660lx 2006-03-22 6:22 PM
| |
| |
H/PC Elder Posts: | 2,156 |
Location: | Barrie, Ontario | Status: | |
| I wouldn't worry too much. My 890 has developed a buzz when the backlight is less than full. I'm sure it has something to do with the CCFL. They are limited to X hours on time before they die. | |
| |
Administrator H/PC Oracle Posts: | 18,041 |
Location: | United Kingdom | Status: | |
| Can you explain a bit more what you mean by 'tremors'? | |
| |
H/PC Elder Posts: | 2,156 |
Location: | Barrie, Ontario | Status: | |
| Either it died or it wasn't important.... | |
| |
H/PC Oracle Posts: | 16,175 |
Location: | Budapest, Hungary | Status: | |
| i'd like to know...
interested as one of my 750C's, the first, has always had a similar problem... | |
|
Seconds to generate: 0.203 - Cached queries : 62 - Executed queries : 13
| | |
|