|
| can any one help me to build for WinCE 2.0 using eVC++ 3.0 please ?
I've installed eVC++ 3.0 and the WinCE 2.11 SDK (the defaul SDK that comes with eVC) then installed WinCE 2.0 SDK.
But eVC 3.0 couldn't recognize the 2.0 SDK !!
it only recognizes the default WinCE 2.11 SDK.
Thanks,
|
|
| |
|
H/PC Elder Posts: | 2,294 |
Location: | Sunny California | Status: | |
| Did you search the forum? I know that at least two people have asked this before. |
|
| |
|
| Impressive I see you say the same things to all the people who post jajajja is impressive
WHY you don't answer at all of us???
And I didn't do the last post |
|
| |
|
H/PC Oracle Posts: | 16,175 |
Location: | Budapest, Hungary | Status: | |
| i doubt you can easily use evc3 with the ce2.0 sdk... http://www.hpcfactor.com/forums/forums/forum-view.asp?fid=44 this forum has a few threads on how to compile for ce 2.0. there's some trick to make some 2.11 kit work with 2.0 |
|
| |
|
Administrator H/PC Oracle Posts: | 18,010 |
Location: | United Kingdom | Status: | |
| There are ways to get a level of compatiblity with eVT and CE2.00, it has been well documented in this Developers Forum before, please have a search back for the information. The fix is not a nice and cosy one though, please keep that in mind. |
|
| |
|
H/PC Sensei Posts: | 1,330 |
Location: | North of England | Status: | |
| |
|
| |
|
Factor Fanatic Posts: | 55 |
Location: | Brazil | Status: | |
| Quote windguy - 2006-03-29 4:15 AM
can any one help me to build for WinCE 2.0 using eVC++ 3.0 please ?
I've installed eVC++ 3.0 and the WinCE 2.11 SDK (the defaul SDK that comes with eVC) then installed WinCE 2.0 SDK.
But eVC 3.0 couldn't recognize the 2.0 SDK !!
it only recognizes the default WinCE 2.11 SDK.
Thanks,
actually, eVT will never recognise the "hacked" SDK as WCE 2.0, but always as 2.11. But trust-me, the trick works even for WCE 1.0 |
|
| |
|
Factor Fanatic Posts: | 55 |
Location: | Brazil | Status: | |
| Quote windguy - 2006-03-29 4:15 AM
can any one help me to build for WinCE 2.0 using eVC++ 3.0 please ?
I've installed eVC++ 3.0 and the WinCE 2.11 SDK (the defaul SDK that comes with eVC) then installed WinCE 2.0 SDK.
But eVC 3.0 couldn't recognize the 2.0 SDK !!
it only recognizes the default WinCE 2.11 SDK.
Thanks,
actually, eVT will never recognise the "hacked" SDK as WCE 2.0, but always as 2.11. But trust-me, the trick works even for WCE 1.0 |
|
| |
|
Factor Fanatic Posts: | 55 |
Location: | Brazil | Status: | |
| Quote windguy - 2006-03-29 4:15 AM
can any one help me to build for WinCE 2.0 using eVC++ 3.0 please ?
I've installed eVC++ 3.0 and the WinCE 2.11 SDK (the defaul SDK that comes with eVC) then installed WinCE 2.0 SDK.
But eVC 3.0 couldn't recognize the 2.0 SDK !!
it only recognizes the default WinCE 2.11 SDK.
Thanks,
actually, eVT will never recognise the "hacked" SDK as WCE 2.0, but always as 2.11. But trust-me, the trick works even for WCE 1.0 |
|
| |
|
Factor Fanatic Posts: | 55 |
Location: | Brazil | Status: | |
| Quote windguy - 2006-03-29 4:15 AM
can any one help me to build for WinCE 2.0 using eVC++ 3.0 please ?
I've installed eVC++ 3.0 and the WinCE 2.11 SDK (the defaul SDK that comes with eVC) then installed WinCE 2.0 SDK.
But eVC 3.0 couldn't recognize the 2.0 SDK !!
it only recognizes the default WinCE 2.11 SDK.
Thanks,
actually, eVT will never recognise the "hacked" SDK as WCE 2.0, but always as 2.11. But trust-me, the trick works even for WCE 1.0 |
|
| |
