Irony of life ... flashed the CE.NET 4.1 image successfully! ... with IE5.5 inside, but WLAN card's HPC2k drivers does not work!
ok, let me go and google for some answers ...
(psst, if anyone knows the answer to the driver issue, pls reply or PM me!
)
EDIT: Thought I will post the transcript from the flashing sequence ... *phew*
Firmware Update Successfully Finished
Press Button to restart
Firmware Update Successfully Finished
Press Button to restart
Firmware Update Successfully Finished
Press Button to restart
Firmware Update Successfully Finished
Press Button to restart
Firmware Update Successfully Finished
Press Button to restart
Firmware Update Successfully Finished
Press Button to restart
^C
C:\opensimpad>serload loader_bl.alt
Ready to download file "loader_bl.alt". Press RESET!
PBL V2.4 20.07.2001
Booting...
================================================
Siemens Switzerland Bootloader V2.5.3 10.06.2003
Running @206Mhz Processor ID 0x6901b118
Press ESC for monitor
Occupied Memory: [0x00004000-0x00008000],[0x01f00014-0x01f6d00c]
Flash Id 0x00000018 at virt adr 0x05000000 Size 0x01000000
No 32Bit Flash detected 0x00000000
FlashImage Checksum 0x05040014-0x05059f11=0xa6a4ca93 Bootloader Image OK
Fabdata Flash @0x05059f18 Ram @0x01f19f18 FABDATA: S842-KJEZY
MQ200 - Revision ID=2 ...
Initialise PCMCIA Interface... done.
Codec UCB1200 ID:0x1005 Ver.5 Dev.0 Suppl.1 IO 0x00000000
No PCMCIA Card Attached
NO PCMCIA CARD! -- Use serial IO
Sysinit done
☻Setting baud rate to 115200
♠☻Serial download request
Booting : <NULL>
Serial download entered.
☻☻
Base : 0x1f00000 Size 107300 entry:0x1f00014
Overlap: 1f00000-1f1a324 && 1f00014-1f6d00c
Will fail -- try to load alternate loader: loader.alt
^C
C:\opensimpad>serload loader_bl.alt
Ready to download file "loader_bl.alt". Press RESET!
^C
C:\opensimpad>serload loader_bl
Ready to download file "loader_bl". Press RESET!
^C
C:\opensimpad>serload loader_bl
Ready to download file "loader_bl". Press RESET!
PBL V2.4 20.07.2001
Booting...
================================================
Siemens Switzerland Bootloader V2.5.3 10.06.2003
Running @206Mhz Processor ID 0x6901b118
Press ESC for monitor
Occupied Memory: [0x00004000-0x00008000],[0x01f00014-0x01f6d00c]
Flash Id 0x00000018 at virt adr 0x05000000 Size 0x01000000
No 32Bit Flash detected 0x00000000
FlashImage Checksum 0x05040014-0x05059f11=0xa6a4ca93 Bootloader Image OK
Fabdata Flash @0x05059f18 Ram @0x01f19f18 FABDATA: S842-KJEZY
MQ200 - Revision ID=2 ...
Initialise PCMCIA Interface... done.
Codec UCB1200 ID:0x1005 Ver.5 Dev.0 Suppl.1 IO 0x00000000
No PCMCIA Card Attached
NO PCMCIA CARD! -- Use serial IO
Sysinit done
☻Setting baud rate to 115200
♠☻Serial download request
Booting : <NULL>
Serial download entered.
☻☻
Base : 0x8000 Size 107300 entry:0x8014
♠☻[*********************|] 1070086
Load finished with 10kB/sec
Starting Image at 8014 PPCR 0x0000000a
================================================
Siemens Switzerland Bootloader V2.5.3 10.06.2003
Running @206Mhz Processor ID 0x6901b118
Press ESC for monitor
Occupied Memory: [0x00004000-0x00008000],[0x00008014-0x0007500c]
Flash Id 0x00000018 at virt adr 0x05000000 Size 0x01000000
No 32Bit Flash detected 0x00000000
FlashImage Checksum 0x05040014-0x05059f11=0xa6a4ca93 Bootloader Image OK
Fabdata Flash @0x05059f18 Ram @0x00021f18 Copy Fabdata to Ram... Done
[*************************-]
Firmware Update Successfully Finished
Press Button to restart
Firmware Update Successfully Finished
Press Button to restart
Firmware Update Successfully Finished
Press Button to restart
Firmware Update Successfully Finished
Press Button to restart
Firmware Update Successfully Finished
Press Button to restart
Firmware Update Successfully Finished
Press Button to restart
Firmware Update Successfully Finished
Press Button to restart
Firmware Update Successfully Finished
Press Button to restart
Firmware Update Successfully Finished
Press Button to restart
Firmware Update Successfully Finished
Press Button to restart
Firmware Update Successfully Finished
Press Button to restart
Firmware Update Successfully Finished
Press Button to restart
^C
C:\opensimpad>serload "S842-SI-INT-152 SL4"
Ready to download file "S842-SI-INT-152 SL4". Press RESET!
PBL V2.4 20.07.2001
Booting...
================================================
Siemens Switzerland Bootloader V2.5.3 10.06.2003
Running @206Mhz Processor ID 0x6901b118
Press ESC for monitor
Occupied Memory: [0x00004000-0x00008000],[0x00008014-0x0007500c]
Flash Id 0x00000018 at virt adr 0x05000000 Size 0x01000000
No 32Bit Flash detected 0x00000000
FlashImage Checksum 0x05040014-0x05059f11=0x8912ac03 Bootloader Image OK
Fabdata Flash @0x05059f18 Ram @0x00021f18 FABDATA: S842-KJEZY
MQ200 - Revision ID=2 ...
Initialise PCMCIA Interface... done.
Codec UCB1200 ID:0x1005 Ver.5 Dev.0 Suppl.1 IO 0x00000000
No PCMCIA Card Attached
NO PCMCIA CARD! -- Use serial IO
Sysinit done
☻Setting baud rate to 115200
♠☻Serial download request
Booting : <NULL>
Serial download entered.
☻☻
Base : 0x1080014 Size 27254787 entry:0x4081000
[*********************|] 272547844784
Load finished ♠
Burn Image with entry at 4081000
Write File to Flash
This image is different in 6550604 longwords
Reading Flash ID at 0x08000000...
Write changed blocks to Flash with ID: 0x0018 [0x05080000-0x06a7e017]
+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------
+---------+---------+---------+---------+-------
***************************************************************************************************************************************************************B
*************************************************
Successfully written !
Done
PLEASE RESTART TARGET
......................
♥Calling Monitor
=====================
Monitor:
=====================
Boot from Flash 'f'
Boot from Net 'n'
Power Off 'o'
Erase PSM+Registry'p'
Exit 'q'
Erase Registry 'r'
Erase Flash 'y'
Soft Reset 's'
Print Fab-String 'w'
-> ^C
C:\opensimpad>
Edited by Snappy! 2005-06-17 10:29 AM