Thanks for you guys here.

First of all, don't blame my english writing skill(I know my english skills sucks) I'm a Korean user.

I've been recently perchasing Blufin PMP (maybe some of you guys know about the machine)
and I really wanted to use some PDA programs like Mdict, Phatpad, isilo and so on.

Because the softwares don't support Wince 5.0 on Mips hardware, I had some problems to run them

While I was searching the web, I found this forum.( It was really hard for me to find apps and DLLs)

Anyways from this forum I got DLLs to run the apps and info about hexediting.


Thanks guys!

Ahn nyong haseyo,


Try and post this in the Windows 4.x and 5.x forum for better response

S/F,
CEYA!

hey Slacker, cool.. can you post pics of the blufin? what is it like??

Ah, Did I write this post in a wrong Category?
Sorry about that. I don't know how to move this thread to wince 4.x and 5.x forum.

cmonex// I promise that I would post some pics of Blufin soon. No problem!

Edited by Slacker 2006-09-29 11:15 PM

After all the work, I realized that I am not good at taking picture

Spec:

Op67N:
OS: Wince 5.0 Pro Plus
CPU: AMD AU 1200 (Mips)
RAM: DDR2 128MB
Display: 16:9 WQVGA, 480*272 pixel,
TV out: NTSC, PAL S-Video, HDTV(480p, 720p)
Digital Camera: 1600*1200pixel(UXGA) CMOS
HDD: 30GB 1.8 inch 4,200rpm
USB: USB 2.0, OTG. USB host and device (480Mbps)
Pc connect: Mass Storage, ActiveSync, MTP(Media Transfer Protocol)
SD card slot: SD memory, SDIO WiFi, Bluetooth, SDIO GPS
Battery: 2.800mAh
Recharge: DC adapter, Standard 24pin chellphone recharger(maybe Korean Only?)
VIDEO Codec: MPEG-1, MPEG-2, WMV9, DIVX (V3.11, V4, V5) MPEG-4
AUDIO CODEC: AAC, PCM, AC3, WMA,OGG

I'm satisfied with this PMP but in some part there are several problems.
Inner digital Camera is almost useless(even worse than chellphone camera)
Only a few apps to run.
Some problems to run Xvid ac3 format video files

I heard the company is exporting Blufin to Japan soon. but don't know how much it will be.

I bought it $700 (expensive!!!!!!!!)

Pretty good pix if you ask me. Really cool device!

Moved to CE5 Support

A facinating little device

nice pics!!

would be cool to have one

did you ever have ce.net 4.x devices? if yes, how is ce 5.0 different from 4.x?

what is the cpu like?

It's my first PMP, so I can not compare to wince 4.x
I don't know how wince 4.x works so only I can tell you is about blufin and wince 5.0.

Nowadays a few companies in Korea start to make PMP with AU1200 CPU
They are Blufin's OP67 series(Wince 5.0), Youkyung(Viliv)'s P2 (Wince 5.0 and Linux dual boot!!!), and Digital Cube's T43(Linux?)
I think the reason why they chose Au1200 is it's good at playing Multimedia sources.(Divx, WMA, Xvid, and so on...)
And it doesn't have soft-reset. It completely turns off power. but settings and files are saved in harddisk.
(even registry is saved in harddisk. I heard it's hive registry based but don't know what it is)

Slacker, very nice pics .. It looks like a cool device