W-lan Driver for Jornada 820/e - Siemens I-gate 11M

Hello, can someone give me a link to a driver for the PCMCIA card? And how can I make a hard reset on my device?
Thanks

I've got an 820 (not the /e), can't answer the driver issue, but for resetting my device, I just:

(1) Unplug the unit (if it's plugged),
(2) Remove the backup batteries,
(3) Remove the main battery, and
(4) Wait (a minute s/b fine).

Put it all back and turn it on, your system s/b an empty slate and you'll have to do all the initial boot stuff (i.e.: user name, et al.).

Cheers!

Have you tried google with:

siemens "i-gate" 11m

Here's a page in German (I think ) that's one click down from the top hit:

http://www.wirelessnetwork.ch/not-flash/products/11mpccard.htm

Cheers!

Hello, thanks for the infos, but i cant find anything, on google and at this page...

isn't this card PRISM?

yes, but when I insert the card, the PRISM w-lan Programm says that no card is plugged in
And the hardware-program displays, that I inserted a LAN-network-card (??Wired??)
I worked with a Zyxel Zyair b-100 PCMCIA card, and it worked perfect, but now, when i try to use it, the LEDs on the card blink 5 seconds, and then, the hardware-program shows me a unknown PCMCIA Card?? Any reasons for that?

Yeah - it's waiting for you to tell it the driver DLL file. Just type in PRISMNDS and you should be good to go.

YEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEESSSSSS thanks a lot!!!! now it works