ACTiSYS USB to IrDA SIR Adapter

Universal Serial Bus

Model: ACT-IR120UD

Links

Compatibility

Compatibility	Official	Community
Windows CE 1.00
Windows CE 1.01
Windows CE 2.00
Windows CE 2.10
Windows CE 2.11
Windows CE 2.12
Windows CE 3.00
Windows CE .net 4.00
Windows CE .net 4.10
Windows CE .net 4.20
Windows CE 5.0
Windows Embedded CE 6.0
Windows Embedded CE 6.0 R2
Windows Embedded CE 6.0 R3
Windows Embedded Compact 7.0
Windows Embedded Compact 2013

Community Rating
No one has rated this device yet! :-(

Buying Resources:

Search for ACTiSYS USB to IrDA SIR Adapter ACT-IR120UD on:

These links support HPC:Factor through small referral commissions

Community Feedback

Please take a moment to share your experiences with the ACTiSYSUSB to IrDA SIR Adapter and rate this device.

No votes

What did you think of this device?

You must be registered and logged into HPC:Factor in order to contribute to the HCL.

Report Your Experiences...

You must be registered and logged into HPC:Factor in order to contribute to the HCL.

Seen something wrong?
Report an update, error or a correction for the "USB to IrDA SIR Adapter" » Submit Correction

Reported Successes

None Reported: Please 'Report your Experiences' to be the first!

Reported Failures

None Reported: Please 'Report your Experiences' to be the first!

Notes

General Notes:

Supports mandatory IrDA® layer: IrPHY™, IrLAP™, IrLMP™, TinyTP™ and IAS™. Supports upper layers IrCOMM™, IrLPT™ and OBEX™ Supports both IrDA Primary and Secondary mode, changeable by COMSET utility. Supports host baud rate from 1.2 kbps to 115.2 kbps, which is changeable by COMSET utility. IrDA baud rate from 9.6 kbps to 115.2 kbps, which is flexible setting by IrDA devices. [Factory Default Setting]: Baud rate =115.2k bps;8N1 Supports Windows 98/ME/2000, Windows XP SP2/Vista/7/8/8.1/10 (32 & 64 bit), Windows Server 2003/2008 (32 & 64 bits), Mac OS (both Intel & Power PC), Android, Linux, Windows -CE (ARM & x86) USB to RS232 Serial conversion device and its driver creates Virtual COM port, which has Less Latency time compared with any other virtual COM port, average 1.5 ms. while that of a real COM port is about 0.5ms. Fully compliant with USB 3.0 (also backward compatible with USB 2.0). Two chips in this dongle: USB chip and IrDA chip. USB chip has 256 bytes outbound buffer and 256 bytes inbound buffer. Nothing or minimum changes in user software, which are already working with ACT-IR100SD RS232 serial adapter. Power supplied from USB directly.

Supports baud rates: 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, 115.2 Kbps. USB interface; compatible with and directly replaces Raw IR RS232 adapters: IR220L+, IR220L, IR220Li and IR220LN Customization to IR224UN-Li, IR224UN-L+, IR224UN-LN (96 ~115) at factory is OK. [Factory Default Setting] : IR224UN-LN115 Also compatible with competitors' models: IFSYS 8001A Level mode (=IR224UN-IF-level) & Pulse mode (=IR224UN-IF-pulse). Fully compliant with USB 3.0 (also backward compatible with USB 2.0) Supports Windows 10/8.1/7/8(32 & 64 bits)Vista/XP/2000, Android, Mac OS (both Intel & Power PC), Linux and Windows CE (both ARM & X86) CD for setup & manual.

Check \HKEY_LOCAL_MACHINE\Drivers\Active\USBSER folder in registry for the COM port number.

Drivers

Windows CE 5.0

Download Driver

Community Comments

There are no community comments on the "ACTiSYS USB to IrDA SIR Adapter".

You must be signed-in to post comments in the SCL. Not registered? Join our community.

Contributed by	torch		Submitted on	01 August 2023
Inserted by	C:Amie		Last Updated	01 August 2023

Hardware Compatibility List: The HCL is provided for free to the Handheld PC Community and we do not carry advertising to support our services. If you have found the HCL useful, please consider donating.