MP780 128 Bit WEP with wpc11 v2.5

IM using the WL100 driver. My firmware version primary is 1.1.4 and secondary is 1.7.4

uninstall that wl100 crap.. install the intersil 1.07.37 for ce 2.11 (hpc pro) from the cesd http://www.hpcfactor.com/support/cesd/h/0028.asp
driver name is prismnds

Edited by cmonex 2007-06-21 3:28 PM

Is there any way to install this via cab files?

yes, if you download the driver from the cesd, run it, you'll find the cabs in program files

do you run each one of them? They seem pretty big.

Is there anyway to get it to ask for the driver name again without having to hard reset the device?

yes. eject the card, uninstall the old driver, then go to the registry, under HKLM/drivers/pcmcia find the old driver's entry and delete it. reset, install new one, and you will be asked for the driver name

Edited by cmonex 2007-06-22 12:05 PM

the one you told me to dl. I just installed via the host.

Edited by bobconan 2007-06-23 10:34 AM

can you express it a little more clearly? i dont know what you mean

intersil 1.07.37

ok.... is there any problem with it?

Nope Works Perfectly now. Haha thought I already mentioned that.

Edited by bobconan 2007-06-25 9:22 AM

About this, I tried to connect a wpc11 v2.5 on my MP 880, hard resetting and installing PRISM.4000.cab, WPC11.HPC211MIPS.cab, and WL100.4000.cab in each try, with no luck. It asks for the dll everytime, but they all ask to plug the card in when it already is.
One option I didn't try is to get someone's bUSEFUL backup file (*.buf) with the right configuration. But here, in Lima, my device is really one of a kind, and most likely won't ever find such a file, not even a similar device.
Any help, please.

Edited by cybernietzsche 2007-09-06 12:37 PM