Port Driver

When printing with Mobile GearII MC/R450, MC/R550, the following functions are available.
We will improve.

·In "ATOK Pocket Settings" in the control panel, select 'ATOK Pocket.
If you open "MG Printer" with 'Use' checked, "MG Printer"
Improves the issue where the settings screen is not displayed correctly.

In addition, the following functions will be enhanced.

·It is now possible to print on Hewlett-Packard's DeskJet 350CBi.
(Set the printer setting when printing to 'PCL Laser' or 'PCL Inkjet')
need to do it. )

By incorporating this driver, data storage in the Mobile Gear II built-in RAM is possible.
It consumes approximately 96KB of memory.

When Mobile Gear II is initialized or the main battery and backup
If both batteries are exhausted and the contents of the main unit memory are erased,
This module needs to be reinstalled. Prepare for reinstallation
Please save the downloaded module on your memory card or computer.
Thank you very much.

This software can be installed in two ways.

1. How to download directly to Mobile GearII
2. After downloading to your computer, transfer it to Mobile Gear II via ActiveSync3.1.
How to install

*In order to download to your computer, in addition to Mobile Gear II, you need the following environment.
is required.

Hardware: NEC PC-9800 series
(PC) NEC PC98-NX series
IBM PC/AT 100% compatible
OS :Microsoft(R)Windows(R)95 (Japanese version)
Microsoft(R)Windows(R)98 (Japanese version)
Microsoft(R)Windows(R)2000 (Japanese version)
Microsoft(R)WindowsNT(R)4.0 (Japanese version)
(Applied with Service Pack 3 or later Service Pack)
Others: A modem that can be connected to the above hardware
Communication software

1. How to download directly to Mobile GearII

(1) Save R550_port.CAB to Mobile GearII\My Handheld PC\Program Files
Download it to the folder.

*The downloaded file (R550_port.CAB) will be displayed once the installation is complete.
It will be deleted automatically, so please copy it to a memory card etc. for backup purposes.
We recommend that you take .

(2) Close all Mobile GearII applications.

(3) From the start button of Mobile GearII, select [Start]-[Program]-[Execution]
Start Explorer by selecting \Program Files
Display the da.

(4) Double-tap R550_port.CAB.

(5) "MC/R550,450 port driver update..." will be displayed, so
Press the [OK] button.

Note: This dialog box specifies the installation directory.
This is for the purpose of
Please press . Enter the installation directory in the [Name] section.
If you have entered the MC/R550,450 port driver update
The message "Version (R1.30) has been set up" is displayed.
However, the installation is not performed correctly. In this case, again (1)
Please do the following work.

(6) When the process is executed and completed, “Installation is complete.
In this state, use the stylus to press the reset switch. "and
A message will be displayed, so press the [OK] button.

(7) "MC/R550,450 port driver update version (R1.30) is set up.
"Reset the main unit." will be displayed. Reset the main unit.
(There is no problem even if you reset the main unit after pressing the [OK] button here)

For instructions on how to reset the main unit, please refer to the instruction manual "Nice to meet you Mobile Gear"
Please refer to “Resetting - Please read before resetting.”

You are not currently logged-in. To download you must be logged-in and be a subscriber or have met our community quality and reputation requirements as a free user - Find out more · Subscribe

Support the Site

Please help to pay for the download that you are getting from us today and help to support our desire to run the site without paid subscriptions or advertising by making a donation to the site. It doesn't matter how much or little you donate, but by donating you will help to ensure that we can continue to offer some of the Internet's most popular, rarest and unusual downloads for Windows CE devices for now and for the future.